Píopa Cruach Dhosmálta 321 Monaróir Tube Coil
Sonraíochtaí:
Píopa Cruach Dhosmálta 321 Monaróir Tube Coil
1).Trastomhas: 3.175-50.8mm(1/8″-2inc)
2).WT: 0.3 – 3mm
3).Gráid: 304 316304 304L 316 316L 310S 2205 2507 625 825 etc.
4).Caighdeán: GB / ISO / EN / ASTM / JIS, etc.
7. Caoinfhulaingt: OD: +/- 0.01mm;Tiús: +/-0.01%.
8.Surface: Bright nó anneal agus bog
9. Ábhar: 304, 304L, 316L, 321, 301, 201, 202, 409, 430, 410, cóimhiotal 625 825 2205 2507 etc.
10. Pacáil: LCL cás adhmaid bhá pola, FCL cruach féin nó pola bhá
11. Tástáil: Neart toraidh, neart teanntachta, tomhas hydrapress
12.Ráthaíocht:An tríú páirtí (mar shampla: SGS TV) cetification ect.
13. Iarratas: Maisiú, troscán, déanamh ráillí, déanamh páipéir, gluaisteán, próiseáil bia, leighis.
14: Buntáiste: tá muid ag monaróir.with quanlity maith agus ar phraghas réasúnta. Is féidir linn bualadh leat go léir is gá.we are gairm
Gach Comhdhéanamh Ceimiceach agus Airíonna Fisiceacha do Chruach Dhosmálta mar atá ag sreabhadh:
| Ábhar | Comhdhéanamh Ceimiceach ASTM A269 % Uas | ||||||||||
| C | Mn | P | S | Si | Cr | Ni | Mo | NB | Nb | Ti | |
| TP304 | 0. 08 | 2. 00 | 0. 045 | 0. 030 | 1. 00 | 18.0-20.0 | 8.0-11.0 | ^ | ^ | ^. | ^ |
| TP304L | 0. 035 | 2. 00 | 0. 045 | 0. 030 | 1. 00 | 18.0-20.0 | 8.0-12.0 | ^ | ^ | ^ | ^ |
| TP316 | 0. 08 | 2. 00 | 0. 045 | 0. 030 | 1. 00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP316L | 0.035d | 2. 00 | 0. 045 | 0. 030 | 1. 00 | 16.0-18.0 | 10.0-15.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP321 | 0. 08 | 2. 00 | 0. 045 | 0. 030 | 1. 00 | 17.0-19.0 | 9.0-12.0 | ^ | ^ | ^ | 5C -0.70 |
| TP347 | 0. 08 | 2. 00 | 0. 045 | 0. 030 | 1. 00 | 17.0-19.0 | 9.0-12.0 | 10C -1.10 | ^ | ||
| Ábhar | Cóireáil teasa | Teocht F (C) Íosmhéid. | Cruas | |
| Brinell | Rockwell | |||
| TP304 | Réiteach | 1900 (1040) | 192HBW/200HV | 90HRB |
| TP304L | Réiteach | 1900 (1040) | 192HBW/200HV | 90HRB |
| TP316 | Réiteach | 1900(1040) | 192HBW/200HV | 90HRB |
| TP316L | Réiteach | 1900(1040) | 192HBW/200HV | 90HRB |
| TP321 | Réiteach | 1900(1040) F | 192HBW/200HV | 90HRB |
| TP347 | Réiteach | 1900(1040) | 192HBW/200HV | 90HRB |
| OD, orlach | Orlach Caoinfhulaingt OD(mm) | Caoinfhulaingt WT % | Fad Caoinfhulaingt orlach(mm) | |
| + | - | |||
| ≤ 1/2 | ± 0.005 ( 0.13 ) | ± 15 | 1/ 8 ( 3.2 ) | 0 |
| > 1/2 ~1 1/2 | ± 0.005(0.13) | ± 10 | 1/ 8 (3.2) | 0 |
| > 1 1/2 ~< 3 1/2 | ± 0.010(0.25) | ± 10 | 3/ 16 (4.8) | 0 |
| > 3 1/2 ~< 5 1/2 | ± 0.015(0.38) | ± 10 | 3/ 16 (4.8) | 0 |
| > 5 1 / 2 ~< 8 | ± 0.030(0.76) | ± 10 | 3/ 16 (4.8) | 0 |
| 8~< 12 | ± 0.040(1.01) | ± 10 | 3/ 16 (4.8) | 0 |
| 12~< 14 | ± 0.050(1.26) | ± 10 | 3/ 16 (4.8) | 0 |
